Thank you for your interest. If you have any questions, please do not hesitate to contact us at: 1201 Terminal Way, Suite 100,  Reno, Nevada 89502,  (775) 674-5408,
FAX: (775) 674-5414, Email: pronet@join.org.

CHIEF ENGINEER/FACILITIES ENGINEER (GTE1)

• Reduced outsourcing of labor to nearly zero due to my extensive skill set. Designed,  fabricated, and installed new systems.
• Kept power costs nearly constant over 6 year period with innovative power management  techniques.
• Critical environmental control equipment downtime kept to 24 hours in a period of 53,000  hours.
• Cut 10% off of Facilities budget each of 6 years. Instituted “green” program of recycling and  reduced cleaning products from 15 to 3 which were water based, non-aerosol.

FACILITIES ENGINEERING AND MANAGEMENT (SFE1)

• Professional Engineer with extensive senior level experience in Facilities Engineering and Management.
• Held progressively more responsible positions in the planning, programming, design, construction, operation, and maintenance of military, university, public works, and public utilities organizations in union and non-union environments for federal, state, and local governments. 
• Extensive experience with water, sewerage, drainage systems, water and wastewater treatment plants, streets, sanitation, industrial, seaport, airfield, education, research, administrative and housing facilities; grounds; and transportation equipment. 
• Lead organizations up to 600 people through 9 direct reports, $150 million annual budgets, and $100 million construction programs, successfully provided services within budget and with reduced staffing.

DESIGN / CONSTRUCTION PROJECT MANAGER (SFE2)

• Professional Engineer with extensive project and program management experience managing up to 47 people and $2 Billion multiyear program in staff, manager, and consultant positions.
• Computerized an annual billion dollar Host Nation Construction Program resulting in the reducing the 500 Man Hours reprogramming effort by 98 %  for each interaction and saving over a quarter million dollars each year.
• Managed staff of 15 starting up a 1.4 billion dollar Security and Justice Sector, Iraqi Reconstruction Program Contract, awarding 1,300 projects to the design/build contractor, on schedule with only half a staff.
• Provided staff support for $750,000,000 multiyear Capital Improvement Program, developing an Microsoft Enterprise Project Management Solution with 380 projects providing management information not available before, at the same time, managing 11 projects valued at $100 million.

CONSTRUCTION MANAGER  (SFE4)

• Lead a staff of 1 engineer, 9 inspectors and 3 contract specialists in field construction office overseeing over 100 construction contracts annually, valued at 100 million dollars
• As operations officer and AOIC managed 300 man construction force and over saw the construction of projects valued at $30 million annually
• More recently, provided staff support for $750,000,000 multiyear Capital Improvement Program, developing an Enterprise Project Management Solution with 380 projects providing management information not available before, at the same time, overseeing design and construction of 11 projects valued at $100 million.

SUPPORT PROFESSIONAL (PCL1)

• Extensive experience in producing AutoCad architectural, structural, mechanical/electrical, civil and landscape drawings
• Maintained excellent rapport with clients, consultants, contractors and city & county building departments
• Performed field measure ups and produced as-built drawings for historical renovations
• Performed inspections for construction in progress, hazardous waste operations and asbestos abatement

LICENSED PROFESSIONAL CIVIL ENGINEER (ROG1)

• Designed and wrote engineering reports for civil engineering projects in all stages of planning and design, using AutoCAD, Autoturn, MSOffice, Haestad products, etc.
  Managed civil engineering projects in all stages of design and followed up on projects to completion of construction.
• Successfully supervised up to 15 employees, to include licensed professional engineers, interns, designers, and maintenance workers.
  Worked on complex projects for residential single family and multi family developments (up to 2600 home Planned Unit Development) and large commercial projects (up to 90 acre sites and 900K square feet of total building footprint). The projects included public and private street design, roundabouts, arterial street design, storm drain and public utility improvements.
• Multilingual, with 4 years experience in international technology transfer for specialty building materials.

RESIDENTIAL DESIGNER / CAD MANAGER (AMM1)

• Professional Residential Designer with projects that include the design of  six model homes for an adult living development.  The homes received Energy Star awards, were handicap friendly, and built with ICF exterior walls.
• Managed projects from conceptual design thru construction documents and building department submittals, including contract proposals, budgeting and team management.
• Extensive experience as an AutoCAD draftsman in residential and commercial architecture including developing structural layouts and civil plans.  Developed and supervised drawing standards, sheet layouts and CAD libraries.  Instructed interns and engineers in AutoCAD use and drafting standards.
• Excellent communication and customer service skills with clients, contractors and building officials, Ensured that the clients’ needs were met and that the design complied with the International & California building codes and local ordinances.

MECHANICAL ENGINEER (JGE1)

• Implement internal combustion engine control strategies for reducing emissions by a factor of forty while meeting power targets.
• Experienced using parametric modeling and design with SolidWorks and Pro/Engineer, Computer Aided Design (CAD) and Supervisory Control and Data Acquisition (SCADA).
• Designed and implemented a program to track permit and maintenance requirements for over four megawatts of distributed power generation to save maintenance costs while increasing reliability.

PROJECT MANAGER & FACILITIES MANAGER (HM1)

• Managed Construction Projects large and small projects in hi-tech, telecommunications, defense, and oil and gas, industries completing them on time and within budget.
• Facilities Manager for a redundancy + 1 telecommunications switching site for the electrical power system, HVAC system, UPS wet cell rooms, diesel generators, fire protection and security systems.
• Project Officer for Hurricane Katrina relief project inspecting and evaluating infrastructure including water and sewer systems (pipelines), mass transit systems, and Louis Armstrong International Airport in New Orleans, LA.

LICENSED PROFESSIONAL CIVIL ENGINEER (SAS1)

• Managed Consulting Engineering office, with a staff of 8 engineers, 2 planners, 2 land surveyors, and 4 survey crews.
• Completed Engineer’s Report, as Assessment Engineer, to support acquisition of approximately $20,000,000 in public improvements in connection with a Special Assessment District. 
• Managed land holdings for large national homebuilder, entitling and delivering finished lots for over 2000 home sites, with a total value of budgets in excess of $30,000,000.
• Directed the entitlements for two mixed use development master plans, with a total of almost 2000 units, which required an Environmental Impact Report to comply with the California Environmental Quality Act.

MECHANICAL ENGINEER/DESIGNER (MRR2)

• Expertise in machining, prototyping, sheet-metal design, fabrication and manufacturing processes.
• Successfully deployed PDM and PLM software package from evaluation to implementation within six-months.
• Over 20yrs experience in 3D Solid-Modeling and CAD.
• Awarded Patent No.’s: 6,036,736 (3/14/2000) and 396,277 (7/21/1998).

WEATHERIZATION ASSESSOR (RJL1)

• Retained a 99% customer satisfaction rate through “Eye for Detail” property inspection and appraisal reporting within client’s allotted time frame.
• Experienced in appraising single family residential, small income properties, and manufactured housing.
• Protected client’s integrity by researching and addressing property issues previously overlooked.
• “Eye for Detail”, Property Inspection, Evaluation, Data Research, Assessing, Analysis, Customer Satisfaction, Customer Service, Oral and Written Communications, Active Listening, Critical Thinking, Organization, Investigation, Identification, Problem Recognition – Solving, Data Entry, Record keeping, Filing, Microsoft Suite, & Internet Research.

DESIGNER (WGJ1)

• Would like to join a leading edge Sustainable or Renewable energy firm?
• Operating an engineering office has diversified my skill set in estimating / sales / proposals / negotiations / scheduling and project management.  Being licensed in two states in the Fire Protection contracting business has prepared me for a role in this dynamic industry.
• Looking for a healthy firm with vision to apply my knowledge, use my Auto-CAD and team building skills to enhance my career in a growing industry.

MATHEMATICIAN/STATISTICAL ANALTYST (PRG1)

• Strong hands on experience in numerical analysis, mathematical modelling, combinatorics, graph theory, and probability theory.
• Experience creating game simulation programs for casino slot game designs.
• Strong computer skills in MS Excel, Visual Basic, C/C++, Unix, Linux, and SAS.

SENIOR DESIGN ARCHITECT (GNI1)

• Saved 40% cost and a week of construction time by redesigning two faux smokestacks on a riverboat-themed casino project; contributed to firm profitability by providing a solution that was simpler and less expensive, and subsequently sold for reuse by another client.
• Maximized the use of modern materials to design a 60’ high dome, scale replica of the faceted, ribbed, clay tile-covered dome of the Florence, Italy Cathedral, for a Tuscan-themed facility.
• Facilitated the construction of a 110-bed regional correctional facility in rural Bethel, Alaska, overcoming the challenges posed by no road access and no large scale poured-in-place concrete (no concrete batch plant).